2018 Sukup Aeration Fans - 3/4 hp - 3 hp 12”

2018 Sukup Aeration Fans - 3/4 hp - 3 hp 12

Sukup manufactures a full line of axial fans and heaters for aerating and drying grain. Sukup Axial Fans provide maximum airflow at lower static pressures found in aeration or in-bin drying. Sukup also offers 38 and 44 low speed axial fans for roof dryers and other shallow grain depth applications.

• Sukup Axial Fans give the highest airflow for the money!

• 3500 RPM motors used in Sukup Axial Fans have been specially-engineered for Sukups high-performance blades.

• Square end plates give uniform support all around the housing while eliminating legs that concentrate stress and distort the housing. Square housings also maintain the accurate roundness of the housings, allowing for close fan blade tip clearance.

• Close tip clearance increases airflow by preventing air from blowing back through the area between the blade and housing.

• Fan blades are precision-balanced for vibrationfree operation

• Blades are secured to the motor shaft with Trantorque bushings to ensure the most secure attachment, as well as serviceability.

• Galvanized housings resist rust and look good for years to come.

• Two-year limited warranty

• Highest Airflows in The Industry

• Square End Plates For Increased Housing Strength

• Safety First Fan Blade Mounted Downstream of Motor

• Heaters

• Large Access Door

• 2. Very Efficient Burner Design

• 3 Year Warranty on Reliable Circuit Board

• Sukup 12 18 fans are ideal for applications where static pressure is less than 2.

• Totally-enclosed, air-over motors on 12", 14" and 18" axial fans have been designed for years of trouble-free operation.

• Fans can be easily mounted to push or pull air.

• 12 and 14 fans come wired with a cord. 18 fans are available with or without controls.

• Change wiring easily on the dual-voltage motor, since the connection box is on the end of the motor, rather than on one side.