2018 Rome Equipment VRT-530 

2018 Rome Equipment VRT-530

For use with tractors in the 180 282hp range

• The main V frame is constructed of tough high strength tubing with an all welded box type fishplate with a 1/2 (13mm) x 6 (152mm) plate on the underside that is swept back 35.

• Hinged with a hydraulic self-leveling device to allow uniform subsoiling in shallow and deep applications.

• Abrasive resistant alloy steel shanks which are flame cut to a parabolic curve will shatter the toughest hardpan to a depth of 24 (610mm).

• Shanks set at 30 (762mm) spacing and are shear bolt protection.

• 2 (51mm) high grade steel pivot bolt aligns shank

• 2 (51mm) x 3/4 (19mm) tough wear strips are easily replaced.

• Designed for maximum clearance and weight transfer to drawbar of tractor. Equipped with a heavy duty vertical lift transport undercarriage.

• The hitch, main frame, and shank holding plates are designed to alleviate lateral and torsional stress and are all low hydrogen welded

• Center V frame is all welded box type construction made of 6 (152mm) x 8 (203mm) x 3/8 (10mm) rectangular tubing with 1/2 (13mm) x 6 (152mm) fishplates.

• Parabolic curved shanks are 1-1/2 (38mm) x 11 (279mm) x 42 (1067mm) grade T1 alloy steel.

• Shear bolts are 1 (25mm) x 5 (127mm) grade 5.

• Four 12.5L x 16 12 ply tires. Two transport and two gauge wheels all on eight bolt hub assemblies.

• Hydraulic control group includes one 5 (127mm) x 12 (304mm) drawbar cylinder, one 5 (127mm) x 16 (406mm) transport cylinder, hoses, and quick couplers to reach the rear of the tractor.

• Depth gauge rod provides leveling (frame) adjustment.

• Gauge wheels determine the desired working depth; adjustments made with the gauge wheel adjusting rods.

• Cylinder lock assemblies for each cylinder rod keeps cylinder from retracting if pressure is lost while transporting.

• Bolt on hard surfaced fabricated points for shanks.