2027 Lane Shark LS2 

2027 Lane Shark LS2

LANE SHARK LS2

Production of the LS-2 has been discontinued and has been replaced by the upgraded LS-4 model.

The LS2 is the only patented, multi-position brush cutter for tractors with a minimum weight of 3,000lbs and a hydraulic flow range of 8.5-20gpm. Supported by a cutting diameter of 44”, the LS2 can tackle overgrown vegetation and cut the time spent on brush clearing jobs by more than half, and with 11 cutting positions make sure you get the job done right.

Features May Include:

LS2: Key Features

• The Lane Shark LS2 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
• Cutting width / cutting area of 44"
• Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44". The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
• 11 cutting Positions
• The Lane Shark LS2 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
• The Lane Shark LS2 weighs just under 450 lbs.
• When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
• NOT COMPATIBLE WITH SKID STEERS

LS2: Compatibility Specifications

• Hydraulic implement flow rate 8.5gpm to 14.9gpm - Standard motor
• Hydraulic implement flow rate 15gpm to 20gpm - High capacity motor (Special Order Only)
• Hydraulic rear remotes* or third function. Must have a WR Long C-Flow component OR return direct to sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
• We do not recommend rear remote plumbing as some tractors may lose loader priority
• NOT COMPATIBLE WITH DIVERTER VALVES
• Minimum dry tractor weight of 3000 lbs
• Minimum tractor width of 55 inches
• Certified roll over protection system
• For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

Column

All Lane Shark products are proudly manufactured and assembled in the USA

• WR Long Inc Third Function Valve Kits
• Lane Shark C-Flow Valve Kits
• Lane Shark Switch Boxes
• JD Hook and Pin Attachment