2026 Land Pride FMPM3760
Get in Touch
Description
2025 Land Pride FMPM3760
Land Pride’s familiar Parallel Arm Mower received a makeover and has been outfitted with a new mowing head. The FMP27 & FMP37 feature the parallel arm from our popular RCP27 & RCP37 with a Flail Head in place of the Rotary Cutter. The FMP is a good tool for mowing around ponds, over guardrails, or below grade while keeping the tractor on level ground and is easily attached and detached from the tractor’s Cat. 2 or 3 3-point hitch, freeing up the tractor for other uses. Contractors, municipalities, and landowners alike will benefit from the versatility of this unit!
Features May Include:
- Inline Filter
- Cleans hydraulic fluid before it re-enters the reservoir.
- Two Parking Stands
- Easy and level storage, easy connecting to tractor.
- Oil Pressure Gauge
- Easily monitor oil pressure for optimum performance of unit.
- 40 Gallon Oil Reservoir
- Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
- Hammer Blades
- 2" Cutting capacity with hammer blades is ideal for trimming brush.
- Independent control option
- Self contained hydraulic system eliminates the tractor/FMP hydraulic incompatibility. This option uses the FMP hydraulic system to operate the mower.
- 11'1" Transport Width
- Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.
Info
Industry
Agriculture
Make
Land Pride
Model
FMPM3760
Trim
Base
Year
2026
MSRP
N/A
Category
Attachments
Subcategory
Mower
Specs
Weight
3,760 lbs | Minimum Base Tractor: 12,000 lbs. (5443 kg)
Cutting Width
60 in (152 cm)
Width
24 ft- 2 in | Transport: 11 ft - 1 in (3.38 m)
Notes
Skid Shoes: 1/4 in (.63 cm) Reversible | Hitch: 3-Point Cat. 2 & 3 with clevis style lower hitch, Quick Hitch adaptable except with M126GX, M135GX, or M6-141 Kubota tractors | Driveline: ASAE Category 2 | Breakaway Protection: Hydraulic Cylinder | Overload Protection: Hydraulic relief valve | Hydraulic Fluid Flow Rate: Approximately 15 gpm or 56.8 L/min. | Reservoir Capacity and Filter: 40 Gallons (151 liters) / Conventional 10 Micron Filter | Speed Increaser Fluid: 80-90W EP Gearlube | Speed Increaser Fluid Capacity: 1 Pint (.47 L) | Deck Thickness: 10 GA (3.4 mm) | Cutting Capacity: 2 in (5 cm) with Hammer blades / 1 1/2" (3.8 cm) with Heavy-duty Y blades | Deck Rotating Arc: 180 Degrees | Power Take-Off Input Speed: 540 or 1000 rpm
Power/Horsepower
Minimum Tractor: 95 hp (70.8 kW)
Blades
Rotation: Reverse | Tip Speed: 9,250 fpm (47 mps)
Height
Adjustment: Rear roller adjustable