2026 Land Pride TR60
Get in Touch
Description
2026 Land Pride TR60
Kubota by Land Pride: The TR Series Trencher is available in two sizes with two motor options. This contractor-grade Trencher will make quick work of trenching runs for pipe, cable, electrical, or irrigation. It comes in two common sizes, 4' and 5' trenching depths, and features 4 different chain styles for each model. Chains are either 2 or 4 pitch for clay, sandy, or lightly compacted soils or alligator or scorpion chains for highly compacted or rocky soils. Only available through Kubota Dealers.
Features May Include:
- Frame
- Heavy frame construction stands up to everyday rugged use.
- Front Bearings
- Machined and enclosed front bearings are protected against dirt and offer extended life.
Info
Industry
Agriculture
Make
Land Pride
Model
TR60
Trim
Base
Year
2026
MSRP
N/A
Category
Attachment / Implement
Subcategory
Rotary Cutters
Specs
Height
34.1"
Width
64"
Weight
1300 lbs (589.7 kg)
Length
102.5 in (2.60 m) | Standard boom: 65.5 in(1.66 m)
Notes
Cup teeth: Hardened with hard facing | Trencher chain side links: Anti-flex | Trencher chain: 2.00 in (5.1 cm) Pitch. 50,000 lb (22679.6 kg) tensile strength | Frame construction: Heavy duty 5/16” (8 mm) thick w/ 3/4" (19 mm) reinforced bar around three sides the bottom lock pin slots | Step and step pads: Heavy-duty, cast steel | Chain options – numerous: Cup teeth on 2 or 4 pitch, scorpion w/cup teeth, or alligator w/cup teeth | Hydraulic coupler options: Standard and large flat face, connect under pressure, couplers | Spoil auger: Removable | Drive bearings between motor & drive sprocket: Self-contained, single & double row ball bearings with extra heavy duty seals | Roller guide bearings at boom head: Self-contained, ball bearings with triple-lip seals & metal shroud covers | Depth indicator: Standard (Viewable from operator seat) | Crumber shoe: Floating | Chain tightener: Grease Cylinder | Motor: Reversible | Motor case drain: Standard | Chain speed Low flow: 227-366 fpm (69-112 m/min) High flow: 221-373 fpm (67-114 m/min) | High flow: 2000-3600 psi (13.79-24.82 MPa) | Hydraulic motor pressure range Low flow: 2400-4500 psi (16.55-31.03 MPa) | Hydraulic motor flow requirements Low flow: 12-24 gpm (45.4-90.8 lpm) | High flow: 24-40 gpm (90.8-151.4 lpm) | Motor options: Low flow (LF) & high flow (HF) motors | Trenching widths available: 6 in, 8 in & 10 in (15.2 cm, 20.3 cm, 25.4 cm) | Side shift travel: 22 in (55.9 cm) | Side shift options Manual: Side shifts from center to 22” (55.9 cm) right of center, Hydraulic: Side shifts from center to 22 in (55.9 cm) right of center | Auger clearance: 28.5 in - 30.5 in (72.4 cm - 77.5 cm) | Auger diameter: 15.5 in (39.4 cm) | Digging depth at 60 degrees: 4 ft (1.22 m)