2019 Kuhns Mfg LLC 15 Bale Edge KN615 Tie-Grabber

2019 Kuhns Mfg LLC 15 Bale Edge KN615 Tie-Grabber

The KN615 picks up the bales 5 wide in 3 rows on edge using 30 teeth on 6 bars. The operator approaches the bale group with a strand of twine already stretched across the back plate of the Tie-Grabber. The hydraulic squeeze bar ensures the group is packed tightly together before the teeth are set. After the teeth are set, the arm completes the rotation around the group and the knotter ties the twine tight, ensuring stable transportation to storage. The KN615 handles 14x18 bales 32"- 36" long with no adjustments. If you want your bales longer than 36", an extended version of this model is available.

With the squeeze arm out and the twine arm on the right-hand side, the operator will align the left side of the Tie-Grabber with the left side of the group of bales on the ground and push the group forward to compact the group. The angle of the squeeze arm will pull the bales in as it moves forward. When the bales are compacted length wise, the operator will activate the primary hydraulic circuit. This will pull the squeeze arm in, compacting the bales sideways. The bale hooks will automatically begin to set, so the operator needs to make sure the Tie-Grabber is firmly set on the group so the hooks can set properly. With the bales properly secured, the operator can safely lift and move the group.

While traveling with the loaded Tie-Grabber, the operator will activate the secondary hydraulic circuit. The twine arm then rotates to the left side for the twine to be tied securely with the Rasspe knotter. When that is finished, the hay is ready to be deposited. When traveling to the next group the operator can return the twine arm to the right hand side.

Features may include:

• This bale arrangement allows you to completely fill your 9'x20' wagon.

• The 15 bale pack has a 33% time savings advantage over the 10 bale as the grab contains 50% more bales, it reduces the number of packs by 33%.