2026 Beaver Valley Supply Co WFMKX2-100-53
Get in Touch
Description
2025 Beaver Valley Supply Co WFMKX2-100-53
Westfield 10″X53′ MKX2 Auger | LP Hopper | 540 PTO | Up To 6,600 BPH | 50 HP Req | 1000 PSI Req
Shipped Complete With
- Shielded CV-PTO Driveline With Overload Shear Bolt
- Hydraulic Lift Cylinder With Hoses & Shut Off Valve
- Standard Low Profile Feed Hopper With Drive
- Hopper Lift Winch
- Intake Boot Hopper With Towbar & Hitch Jack
- Tractor End Hydraulic Couplers
- 15″ Tires Mounted On Rims
Features May Include:
Open Discharge Spout
- Reduced horsepower requirements
- Allows for more efficient flow out of the tube
- New tapered bearing for increased life span
- Equipped with plastic hood for sleeker appearance
- Included on 10”, 13”, and 16” augers
Redesigned Boot
- Separate boot flight with removable shafts (10”, 13”, and 16”)
30’ Tubes and Flights
- Less tube flange and flight connections lead to less auger noise
- Less tube and flight hardware reduces time needed to assemble
- Common flight and tube lengths leading to less variation to stock
- Included on 10”, 13”, and 16” augers
Cylinder Updates
- Commonize cylinders to use with various auger sizes
- Fewer cylinders required to stock
- Change from internal check valve to external check valve
- Easier to access/service/replace in the field
Info
Industry
Agriculture
Make
Beaver Valley Supply Co
Model
WFMKX2-100-53
Trim
Base
Year
2026
MSRP
N/A
Category
Auger
Subcategory
Straight
Specs
Notes
Approximate Hydraulic Fluid Required to Lift Auger: 6.2 Litres / 6.5 US Quarts | Tube Sections: 25-25 | Maximum Transport Height: 12' 6 in (3.8m) | Power Required (Dry Wheat): 50 HP (37.3 kW) | Pressure Required to Raise Auger: 1000 PSI (68.9 bar) | Low Pro Hopper Height: 10.5 in (26.7cm) | Standard Hopper Height: 13 in (33cm) | Sprocket & Chain: #60 | Parking Jack: 2000 lbs (907.2 kg) side wind | PTO Shaft: 14R constant velocity with 5/16 in (8mm) shear bolt | Hub: 4-bolt automotive type hubs | Axle: 2 ½ in (6.03cm) x 2 ½ in (6.3cm) x ⅛ in (0.3cm) wall square tubing | Undercarriage: 3 in (7.6cm) x 11 Ga A-frame | Hydraulic Lift: One 4 in (10.2cm) cylinder with 5/16 in (0.8cm) aircraft cable | Track Shoe: Double 2 ¾ in (7cm) rollers | Track: High yield 11 Ga roll formed | Tube Trussing: 5/16 in (0.8cm) aircraft type galvanized steel cable | Lower Bearing: 1 ½ in (3.8cm) pillow block greaseable ball bearing | Upper Bearing: 1 ¼ in (3.2cm) pillow block greaseable ball bearing | Flighting Shaft: High strength 2 in (5.1cm) OD x 11 Ga tubing | Wear Edge (Reinforced Flighting): Hopper, boot and inclined tube feature 10 Ga ribbon weld, Wear Edge technology | Main Flighting: 9 in (22.9cm) OD x 7 Ga stretched and welded with Wear Edge at critical points | Tubing Gauge: 14 Ga | Tube Connectors: Heavy-duty 3/16 in (0.5cm) angle flange
Tires
15 in (38.1cm)
Wheels
Tread: 106 in (2.7m)
Weight
3042 lbs